200ml Planetary Ball Mill with Optional Materials of Jars

Model: AS-XQM-0.2 and AS-XQM-0.2S
Input: 220V 50Hz, 110V optional
Capacity: 50ml Jar*4 sets
Power: 250W
Rotating speed: Revolution 60-580r / min,Rotation 120-1160r / min

200ml Planetary Ball Mill for Lab Powder Materials Grinding

Description:

1. Planetary ball mill is small, high efficiency and low noise which is the ideal machine for lab R&D, institutions of higher learning, corporate laboratories to obtain micro particle research samples. (Four samples for each experiment).

2. It can be equipped with vacuum ball mill; the sample can be ground under vacuum. It is widely used in geology, mining, metallurgy, electronics, building materials, ceramics, chemicals, light industry, medicine, beauty, environmental protection and other departments.

3. Planetary ball mill is necessary equipment for mixing, fine grinding, sample preparing, nano-materials dispersing, new product developing and preparing small volume high-tech material production.

4. The small volume can be worked in glove box. (Choose model XQM-0.2S with control box separately)

Technical Spec:

Product Model 1	AS-XQM-0.2 General type
Product Model 2	AS-XQM-0.2S with separate control box and milling machine, suitable for work inside glove box
Grinding jar volume (L)	50ml*4 sets
Grinding jar material	According to requirements
Ball material	According to requirements
Maximum loading per tank	Material and grinding medium does not exceed two-thirds of the volume
Feeding material size	Soil material ≤ 10 mm, other materials ≤ 3 mm
Discharge material size	Min 0.1um
Rotating speed	Revolution 60-580r / min, Rotation 120-1160r / min
Speed ratio (revolution: rotation)	1:2
Speed mode	Frequency, programmable stepless speed regulation, manual, automatic timing forward and reverse
Transfer method	Gear drive
Working Voltage	220V 50Hz; 110V customized
Motor power and variable frequency power	0.25 Kw
Way of working	Two or fourmilling jars work at the same time
Maximum continuous operating time	72hours
Programmable control (electronic monitoring)	Ball mill using high-tech microcomputer chip control, can be set to forward and reverse alternately run(0-999min) and forward, pause, reverse, pause, forward (0-999min) alternate operation according to the procedure. Particularly suitable for cooling or intermittent operation.
Net Weight	About 28KG
Warranty	1 Year limited with lifetime online technical support